End shaft manufacturers

    Purpose

    Transcribing unit (one of the core components) for copiers and laser printers. Transfer the "toner image" on the surface of the photosensitive drum to plain paper with high-voltage static electricity. This process is called "transfer". When the positively charged toner moves to the vicinity of the printing paper along with the photosensitive drum, the electrode placed behind the paper is positively charged. Because the voltage is as high as 500～1000V, the electrostatic attraction causes the paper to stick to the light guide plate. The negatively charged toner is adsorbed on the surface of the paper. Because this transfer method is related to the insulation of the paper, when the paper is damp due to the weather, the toner will not be completely and tightly adsorbed on the paper due to the leakage of the paper surface, resulting in poor print quality. There are two transfer methods, one is "corona discharge transfer" (electrode wire), and the other is "discharge rubber roller" transfer. The working principle of the two is the same. Different models have different transfer methods. The early production of laser printers mostly used the corona discharge transfer method. When the photosensitive drum carrying the toner image rotates to a position that is tangential to the transfer electrode or transfer rubber roller, a piece of printing paper is also fed between the two. At this time, the high voltage applied to the transfer electrode starts Discharge, while pushing the printing paper to the photosensitive drum, the toner image on the photosensitive drum will be attracted to the printing paper due to the transfer of the high-voltage electric field on the bottom of the printing paper to complete the secondary transfer of the toner image. The discharge polarity of the transfer electrode wire or transfer rubber roller is the same and negative, but this negative voltage is higher than the negative voltage in the exposure area of ​​the photosensitive drum, so that while pushing the printing paper to the photosensitive drum, it also reduces The toner is attracted to the printing paper as much as possible.

    Composition

    It is composed of a special-shaped aluminum tube in the middle and a steel shaft at both ends.

    Typical process

    1. Special-shaped tube: special-shaped aluminum tube extrusion molding-cut-both ends and inner hole Cutting-ultrasonic cleaning (the middle special-shaped aluminum tube is finished to be assembled);

    2. Both ends of the shaft: the steel bar is cut off on the cam lathe-turning processing-grinding worker-milling flat Or drilling-surface plating (both ends of the shaft are completed to be assembled);

    3. Assembly: press the two ends of the shaft into the inner hole of the special-shaped aluminum tube at both ends -Surface cutting.